Complete catalytic oxidation of o-xylene over Ce02 nanocubes

The activities of CeO2 nanocubes calcined at different temperatures were tested for catalytic oxidation of o-xylene. Using CeO2 nanocubes as catalysts, complete catalytic oxidation of o-xylene was achieved below 210℃. The CeO2 nanomaterials were characterized by means of BET, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). From the TEM images, all Ce02 nanocubes displayed cubic morphology irrespective of calcination temperature. The HRTEM images revealed that these nanocubes were enclosed by reactive {001}planes, which may contribute to the intrinsically catalytic property of o-xylene oxidation. The higher activity of Ce02 nanocubes calcined at 550℃ than those calcined at above 550℃ was attributed to their smaller crystallite size and larger surface area. The influences of reaction conditions were also studied, which found that a higher reaction temperature was necessary for complete catalytic oxidation of o-xylene at higher weight hourly space velocity (WHSV) and o-xylene concentration.     

Preliminary report on methane emissions from the Three Gorges Reservoir in the summer drainage period

Considerable variations may exist in CH4 emissions from the Three Gorges Reservoir.     

Preparation and microwave absorbing properties of the core-nanoshell composite absorbers with the magnetic fly-ash hollow cenosphere as core

Electromagnetic (EM) wave pollution has become the chief physical pollution for environment. The core-nanoshell composite absorbers with magnetic fly-ash hollow cenosphere as core and nanocrystalline magnetic material as shell were prepared by high-energy ball milling. The results of X-ray diffraction analysis (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and vector network analyzer (VNA) analysis indicated that perfect-crystalline nanomagnetic material coating was gotten with a particle size of 12 nm, being dried at 60°C for 2 hr and calcined at 400°C for 1 hr after ball milling. The exchange-coupling interaction happened between ferrite of cenosphere and soft magnet γ-Fe₂03 coating, it enhances magnetic loss of composite absorbers. In the frequency between 1 MHz and 1 GHz, the absorbing effectiveness of the core-nanoshell composite absorbers can achieve ?30 dB, it is better than single material and is consistent with requirements of the microwave absorbing material at the low-frequency absorption.     

南京市郊设施蔬菜重金属含量及健康风险分析

采用火焰原子吸收光谱法测定了南京市郊2个设施蔬菜栽培基地蔬菜中的重金属含量,并与国内蔬菜标准进行比较;运用目标危害系数(the target hazard quotient,THQ)方法评价了当地居民摄食蔬菜导致的健康风险,并比较了成人和儿童居民THQ值大小.结果表明,蔬菜中Pb、Cd、Zn和Cu的平均含量分别是0.1...     

CTMAB增强调控沉积物(生物膜)吸附BPA的作用

研究了经十二烷基苯磺酸钠(SDBS]、曲拉通(TX-100)和十六烷基三甲基溴化铵(CTMAB)改性前后的沉积物(生物膜)吸附双酚A(BPA)的能力,并分析了CTMAB在沉积物(生物膜)吸附BPA过程中的增强机理及表面吸附和分配作用在总吸附中的贡献.研究结果表明,三种表面活性剂对沉积物(生物膜)吸附BPA的促进作用大小...     

几种水合金属氧化物的磷酸根吸附性能

利用简单的碱沉淀法制备不同的水合金属氧化物,并对所得七种水合金属氧化物的磷酸根吸附等温线进行了系统的探讨比较.研究表明,25℃条件下,Al、Fe、Ni、Cu和Ce的水合金属氧化物对磷酸根的吸附最符合Langmuir线性吸附方程,而水合氧化锌和水合氧化钴吸附剂最符合线性等温线模型.所有这七种水合金属氧化物对磷酸根的吸附都...     

电镀行业清洁生产指标体系的修正

文章旨在通过剖析清洁生产指标体系建立的全过程,发现《电镀行业清洁生产指标体系(试行)》存在的缺陷与不足,并进行修正,采用层次分析法对修正后的定量指标体系赋权.最后选用三家电镀企业,对修正前后的指标体系进行评价与对比,并据此证明:修正后的指标体系更能客观评价企业真实的清洁生产水平.     

西辽河流域沙土的氨氮解吸行为研究

采用小型回填式土柱淋溶实验方法研究了西辽河流域沙土的氨氮解吸行为。结果表明,西辽河流域沙土的氨氮解吸行为符合Langmuir和Freundlich解吸等温式;沙土氨氮解吸比率Dr在0.44～0.99之间,平均为0.75,解吸迟滞性指数TⅡ在0.05～0.65之间,平均为0.29,沙土对氨氮的解吸迟滞性较强,解吸可逆性较弱。被吸附的氨氮解吸淋失的环境风险较小;沙土氨氮解吸比率Dr与土壤有机质含量、粘粒含量和粗粘粒含量呈极显著负相关,影响程度顺序为:有机质含量>粗粘粒含量>粘粒含量;解吸分配系数k和解吸迟滞性指数与土壤有机质含量分别呈极显著和显著正相关,与粘粒含量和粗粘粒含量没有相关性;草地、农田和林地结构由于土壤有机质和团聚体含量较高,氨氮解吸迟滞性较强,氨氮流失的环境风险较小,沙荒地结构氨氮流失的环境风险较大。     

电厂二氧化碳捕捉技术对比研究

由于全球温室效应的不断加剧,发展二氧化碳捕捉技术变得十分必要.通过分析燃烧前捕捉、燃烧后捕捉和富氧燃烧捕捉三种二氧化碳捕捉方式流程及其特点,指出三种不同的二氧化碳捕捉技术的发展现状以及应用途径.通过具体对比现有二氧化碳捕捉技术的工作原理以及优缺点,针对现有的几种具体的二氧化碳捕捉技术进行详细的分析,积极应用各种物理、化...